The new moon, if it were visible, when eastern horizon starts at 6 am.
What is meat by eastern horizon?The first bilingual (Chinese and English) community radio show to be broadcast to a local audience in the United Kingdom is called Eastern Horizon. In recent years, it was primarily carried live on Saturdays between midnight and one in the morning on BBC Radio Manchester in Manchester.
The center of the horizon on the front of the planisphere points in the direction of North (0º azimuth). The eastern horizon is on the horizon's right side (90º azimuth), and the western horizon is on the horizon's left (270º azimuth).
The new moon, if it were visible, when eastern horizon starts at 6 am.
To learn more about eastern horizon refer to:
https://brainly.com/question/1807501
#SPJ4
What is the term for the specific set of equations that describe motion in terms of acceleration, displacement, time, and velocity?
The specific set of equations that describe motion in terms of acceleration, displacement, time, and velocity are given as,
v = u + at.
v² = u² + 2as.
s = ut + ½at²
where, v is final velocity, u is initial velocity, t is time , s is displacement , a is acceleration. The above equation shows the equations of linear motion .
The acceleration is defined as ,the change in velocity (Δv) over the change in time (Δt), The unit is [tex]m/s^{2}[/tex]
acceleration (a) = Δv/Δt.
The velocity is defined as the rate of change of displacement .The unit is given by m/s.
Δv= Δx/Δt
In the above equation, Δv is change in velocity, Δx & Δt are the change in distance and time respectively.
To know more about velocity
https://brainly.com/question/12843437
#SPJ4
8 m N & 5 m 30° N of E
Draw and add the vectors.
The Pythagorean theorem can be used to find the resultant, which has a magnitude of 15.6 kilometers. The answer is displayed beneath the diagram.
A resultant vector that is directed both north and east can be created by adding together two displacement vectors with magnitude and direction of 11 km north and 11 km east. The hypotenuse of a right triangle is the result of adding the two vectors' head to tail as shown below. The right triangle's sides are 11 km and 11 km long. Scaled vector diagrams are frequently used to represent vector quantities. An arrow drawn to scale and pointing in a particular direction is used in vector diagrams to represent a vector.
Learn more about vectors here-
https://brainly.com/question/13322477
#SPJ9
What magnitude acceleration does the enterprise need to just barely avoid a collision with the klingon ship? assume the acceleration is constant.
The enterprise must slow down to [tex]-2.5 km/s^{2}[/tex] to avoid a collision.
Describe average velocity.Average velocity is defined as the difference between the change in position or displacement (x) and the time intervals (t) during which the displacement occurs. The average velocity may be positive or negative depending on the displacement's direction. The unit of measure for average velocity in the SI is meters per second (m/s or m[tex]s^{-1}[/tex]).
What are the three equations of kinematics?Only when acceleration is constant and motion is on a straight line can the equations of kinematics be used.
v = u + ats = ut + ½at²v² = u² + 2asLet us assume that,
A = Starship enterprise
B = Klingon ship
Considering that the starship enterprise slows down steadily, the following would be the average velocity:
[tex]v_{a}__{i}[/tex] =( [tex]v_{a}__{i}[/tex] + [tex]v_{a}__{f}[/tex] )/2
where [tex]v_{a}__{f}[/tex] = 0 since it must come to a stop
[tex]v_{a}[/tex] = (50 + 0)/2
[tex]v_{a}[/tex] = 25 km/s
As a result, A must travel 100 km in addition to the distance B travels during that period before coming to a stop:
[tex]d_{A}[/tex] = [tex]d_{B}[/tex] + 100
25t = 20t + 100
5t = 100
So,
[tex]d_{A}[/tex] = 25t
[tex]d_{A}[/tex] = 25(20)
[tex]d_{A}[/tex] = 500 km
and
[tex]d_{A}[/tex] = [tex]v_{a}__{i}[/tex] × t + [tex]\frac{1}{2} a t^2[/tex]
500 = 50(20) + [tex]\frac{1}{2} a(20)^2[/tex]
a = [tex]-2.5 km/s^2[/tex]
Therefore, the enterprise must slow down to [tex]-2.5 km/s^{2}[/tex] to avoid a collision.
To know more about equations of kinematics visit:
https://brainly.com/question/14355103
#SPJ4
The complete question is: "The starship enterprise returns from warp drive to ordinary space with a forward speed of 50 km/s. to the crew’s great surprise, a Klingon ship is 100 km directly ahead, traveling in the same direction at a mere 20 km/s. without evasive action, the enterprise will overtake and collide with the Klingons in just slightly over 3.0 s. the enterprise’s computers react instantly to brake the ship. what magnitude acceleration does the enterprise need to just barely avoid a collision with the Klingon ship? assume the acceleration is constant."
A baseball is thrown at a velocity of 98.4 miles per hour. what is the speed in m/s?
A baseball is thrown at a velocity of 98.4 miles per hour. The speed in m/s is approximately 43.73 m/s.
The velocity or speed means the amount of distance we have travelled per unit time.
The speed given is 98.4 miles/hour
V = 98.4 miles/hour
Since, 1 miles = 1.6 km = 1600 m
1 hour = 3600 s
So the speed in metre per second is:
V = [tex]\frac{98.4 \times 1600}{3600} m/s[/tex]
[tex]\approx 43.73 \ m/s[/tex]
Hence, the speed in m/s is approximately 43.73 m/s.
To learn more about Attention here:
https://brainly.com/question/28500109
#SPJ4
Sabrina is studying exercise physiology. What is MOST likely to be the
main focus of her studies?
O how bodies react when muscles are put to use
O how skeletal bones affect exercise form and posture
O how the lungs and heart respond to aerobic workouts
how anaerobic workouts boost metabolism
According to the research, the correct option is how the lungs and heart respond to aerobic workouts. It is most likely to be the main focus of her studies of exercise physiology.
What is exercise physiology?It is the medical specialty that includes the study and understanding of physical activity as a physiological stimulus and its repercussions on each of the organs of the human body, their behavior and responses.
In this sense, during physical activity or exercise, cardiovascular physiological adaptations occur that improve physical performance since all the body's systems are automatically activated and in tune.
Therefore, we can conclude that according to the research, the correct option is how the lungs and heart respond to aerobic workouts. It is most likely to be the main focus of her studies of exercise physiology.
Learn more about exercise physiology here: https://brainly.com/question/28067904
#SPJ1
set up the experiment as follows:
1. make a small hole in the cardboard. it should be 4 inch from one edge and centered.
2. pull the string or thread through the hole in the cardboard, and tie the ends together to form a loop.
3. slide a large paperclip onto the string, and bend one end out slightly to act as a hook.
4. place a nonbreakable object, such as a kitchen utensil, on the cardboard.
5. select two nonbreakable objects with holes that can be hung on the hook.
what two objects will you select to hang on the hook?
The two objects that I would select to hang on the hook are scissors and stainless-steel cup.
The concept of Balanced ForcesForce symmetry
Balanced forces are those that have opposing directions and equal sizes. One definition of equilibrium is a state of balanced forces.
When the forces are in balance, there is no change in direction.
The sum of balanced forces is always zero. Merging vectors
The momentum or direction of an object cannot be changed by balance forces.
A balanced force keeps an object moving at a steady speed. (Newton’s First Law of Motion)
The Concept of unbalanced forcesAsymmetry of forces
Forces that are not equal in size and differ in direction, always set something moving. (Can alter an object’s direction or speed)
The combined force is equal to the difference between two unbalanced forces acting in opposing directions.
The combined force is equal to the sum of the two unbalanced forces acting in the same direction.
The net force is equal to the resultant when the forces are at right angles.
To know more about questions of such balanced force experiments, visit:
https://brainly.com/question/19127263
#SPJ4
Answer:
Explanation:
The two objects that I would select to hang on the hook are scissors and stainless-steel cup.
The concept of Balanced Forces
Force symmetry
Balanced forces are those that have opposing directions and equal sizes. One definition of equilibrium is a state of balanced forces.
When the forces are in balance, there is no change in direction.
The sum of balanced forces is always zero. Merging vectors
The momentum or direction of an object cannot be changed by balance forces.
A balanced force keeps an object moving at a steady speed. (Newton’s First Law of Motion)
The Concept of unbalanced forces
Asymmetry of forces
Forces that are not equal in size and differ in direction, always set something moving. (Can alter an object’s direction or speed)
The combined force is equal to the difference between two unbalanced forces acting in opposing directions.
The combined force is equal to the sum of the two unbalanced forces acting in the same direction.
The net force is equal to the resultant when the forces are at right angles.
The temperature at which an alligator's egg is incubated will determine the sex of the offspring. the dependent and the independent variables in this experiment are ________.
The infant alligator's sex is the dependent variable in this experiment, and temperature is the independent variable.
By dependent and independent variables, what do you mean?The independent and dependent variables are the two main factors in an experiment. In a scientific experiment, an independent variable is a variable that is altered or controlled to see how it affects the dependent variable. In a scientific experiment, the variable under test and being measured is known as the dependent variable. Example: Your test score is influenced by how much you sleep (an independent variable) (dependent variable). One of the most crucial aspects of scientific study is establishing cause and effect relationships. Knowing which variable is the cause, or independent variable, and which is the effect, or dependent variable, is crucial.
To know more about depdendent and independent variable, click here:
https://brainly.com/question/967776
#SPJ4
A labrador retriever runs 50.0 meters in 7.20 seconds to retrieve a bird. the dog then runs half way back in 3.85 seconds. determine the average speed of the dog and the average velocity of the dog
The average speed of the dog is 6.8 m/s while the average velocity is 6.8 m/s halfway to the starting point.
Speed and velocityThe speed of a moving object is the ratio of the distance covered by the object and the time taken to cover the distance. The average speed is the ratio of the total distance traveled and the total time taken.
Velocity, on the other hand, refers to the speed in a particular direction. In other words, velocity is a vector quantity while speed is a scalar quantity.
In this case:
Total distance covered = 50 + 25
= 75 meters
Total time taken = 7.2 + 3.85
= 11.05 seconds
Average speed = 75/11.05
= 6.8 m/s
Average velocity = 6.8 m/s halfway
More on speed and velocity can be found here: https://brainly.com/question/5794232
#SPJ1
In a first order decomposition, the constant is 0.00586 sec-1. what percentage of the compound is left after 3.32 minutes?
The correct answer for percentage of the compound is left after 3.32 minutes is 55 % .
We use the formula A(t) = A0e-kt for decomposition, where A0 is the initial amount of decomposed substance at t = 0, k is the decay constant, t is the time elapsed, and A(t) is the amount after time t.
The percentage of decomposed compound left after a time t is, [A(t)], divided the the initial amount, [A0], time 100, or A/A0*100:
A = A0e-kt
A/A0 = e^- 0.00586t, [k = 0.00299, divide both sides by A0]
A/Ao = e^(-0.00299*199), [t = 3.32 min*(60 sec/ 1 min) =199 sec]
A/A0 = . 0.551= 55%, (* 100, rounded)
The Arrhenius equation is k = Ae(-Ea/kT), where A is the frequency or pre-exponential factor and e(-Ea/RT) is the fraction of collisions at temperature T that have enough energy to overcome the activation barrier (i.e., have energy greater than or equal to the activation energy Ea).
Learn more about percentage decomposition here :-
https://brainly.com/question/21438582
#SPJ4
The average density of a planet is 1.52 g/cm3. what is its density in kg/m3? (enter your answer in scientific notation.)
Density is equal to the mass of substance divided by its volume.
What is density?Thickness is the substance's mass per unit of volume. The image most frequently utilized for thickness is ρ (the lower-case Greek letter rho), albeit the Latin letter D can likewise be utilized. Numerically, thickness is characterized as mass separated by volume: ρ=m/V where ρ is the thickness, m is the mass, and V is the volume. Now and again (for example, in the US oil and gas industry), thickness is approximately characterized as its weight per unit volume, albeit this is experimentally wrong this amount is all the more explicitly called explicit weight.
Learn more about density, refer:
https://brainly.com/question/26364788
#SPJ4
If the outside air temperature increases during a flight at constant power and at a constant indicated altitude, the true airspeed will:__________
The true airspeed will increase and true altitude will increase.
What is true air speed?True airspeed is the airspeed of an aircraft relative to undisturbed air.
It's the aircraft speed relative to the airmass in which it's flying.
How does outside air temperature affect air speed?If the outside air temperature increases during a flight at constant power and at a constant indicated altitude, the true airspeed will increase and true altitude will increase.
Thus, the true airspeed will increase and true altitude will increase.
Learn more about true airspeed here: https://brainly.com/question/13257916
#SPJ1
Write down the names of three mar-made devices in everyday use that depend,
for their action, upon the moments of forces.
Answer:
Scissors
Tap
Spanner
Explanation:
A rectangular piece of land with an area of 260,000 m²
is 2,000 m long. Write the area and length in scientific
notation, and then find the width.
Considering the defintion of area of a rectangle and multiplication in scientific notation, you obtain:
the rectangular piece of land with an area of 2.6×10⁵ m² is 2×10³ m long.the width of the rectangular piece is 1.3×10² m.Scientific notationScientific notation is a quick way to represent a number using powers of base 10.
The numbers are written as a product:
a×10ⁿ
where:
a is a real number greater than or equal to 1 and less than 10, to which a decimal point is added after the first digit if it is a non-integer number.n is a whole number, which is called an exponent or an order of magnitude. Represents the number of times the point decimal is shifted. It is always an integer, positive if it is shifted to the left, negative if it is shifted to the right.Area of a rectangle
A rectangle is a flat geometric figure with four sides, of which two sides that are opposite parallel to each other have the same length and the remaining two have another length.
The area of a rectangle is calculated from the two different sides (a and b). It is the product of the two contiguous sides of the rectangle:
Area of a rectangle= a×b
where a and b are the measures of the two sides.
Area and length in scientific notationA rectangular piece of land with an area of 260,000 m² is 2,000 m long.
To write the area and length in scientific notation, the following steps are performed:
The decimal point is moved to the left as many spaces until it reaches the right of the first digit. This number will be the value of a in the previous expression. Then: area= 2.60000= 2.6 and length= 2.000= 2.The base 10 is written with the exponent equal to the number of spaces that the decimal point moves. This is a positive number because the decimal point is shifted to the left, and it will have a value of: in the value of area: n=5 and in the value of length: n= 3.So, the rectangular piece of land with an area of 2.6×10⁵ m² is 2×10³ m long.
Width of the rectangular pieceIn this case, you know that a rectangular piece has:
an area of 2.6×10⁵ m².a length of 2×10³ m.Replacing in the definition of a rectangle:
2.6×10⁵ m²= width× 2×10³ m
2.6×10⁵ m²÷ 2×10³ m= width
To divide two numbers in scientific notation, you must divide the numbers that are not powers of 10 (what was previously called the "a" number). To divide the powers of ten, you must subtract the exponents. In this case:
Width= (2.6÷ 2)×10⁵⁻³ m
Width= 1.3×10² m
Finally, the width of the rectangular piece is 1.3×10² m.
SummaryIn summary, you obtain:
the rectangular piece of land with an area of 2.6×10⁵ m² is 2×10³ m long.the width of the rectangular piece is 1.3×10² m.Learn more about
area of a rectangle:
brainly.com/question/7690330
scientific notation:
brainly.com/question/18073768
#SPJ1
If the entire apparatus is immersed in water, what happens to the distance between the fringes on the screen?
The space between the screen fringes will be closed if the complete apparatus is submerged in water.
What does fringe distance mean?The space between two consecutive bright spots (maximas, when constructive interference occurs), or two consecutive dark patches, is known as the fringe width (minimas, where destructive interference occurs). All of the fringes in Young's double-slit experiment are the same length. The formula yields the fringe width. β = λD/d. Because it depends on L, the spacings between various fringes get smaller as the slit distance gets bigger. Since the space between various fringes is wavelength dependent, increasing the light's wavelength also increases that separation.
In comparison to air, water has a shorter wavelength of light. Therefore, when the device is submerged in water, the fringe width will diminish.
To know more about fringe distance, click here:
https://brainly.com/question/12641234
#SPJ4
Particle dislodgement in the filtration process is generally undesirable, except during?
Particle dislodgement in the filtration process is generally undesirable, except during high pressure jets of water applied to filter media during a backwash.
Define filtration process.Filtration is a physical separation procedure that uses a filter medium with a complicated structure that only allows fluid to pass through it to separate solid particles and liquid from a combination. Filtrate is the term for the liquid that passes through the filter medium and is used to describe solid particles that are too large to pass. Larger-than-average particles have the potential to blind the filter by blocking the filter lattice and forming a filter cake on top of the filter. The term "effective pore size" refers to the size of the biggest particles that may successfully pass through a filter.
To know more about filtration, visit:
https://brainly.com/question/4336354
#SPJ4
What is displacement?
A an action exerted on a body in order to change the body's state of rest or motion
B the distance traveled divided by the time interval during which the motion occurred
the change in position of an object
Dan object's change in position relative to a reference point
Displacement is the change in position of an object. Displacement is a vector quantity.
As for the given options, option (a) is the definition of Force. Option (b) is the definition of velocity. Option (d) is the definition of motion. Displacement is the shortest distance between initial point and final point whereas distance is the total distance covered from initial point to final point.
Since displacement is a measure of length, its unit is usually meter. It is denoted as Δx. The formula for calculating displacement is Δx = [tex]x_{2}[/tex] - [tex]x_{1}[/tex], where [tex]x_{2}[/tex] is the final position and [tex]x_{1}[/tex] is the initial position.
Therefore, Displacement is the change in position of an object.
To know more about Displacement
https://brainly.com/question/28609499
#SPJ1
How many moles of disulfur decafluoride are present in 3.46 grams of this compound?
Moles of disulfur decafluoride are present in 3.46 grams of this compound is 0.025 mol
There are 6.022 x 10^23 S2F10 units in one mole
There are 6.022 x 10^23 S2F10 units in one mole of the stuff by definition.
And thus 1.55 x 10^22 molecules/6.022 x 10^23 molecules mol^-1 =~ 0.025 mol
S2F10 is nasty stuff, though apparently it is quite odourless (this is a "good" property in a war gas, because some punter might get a lethal dose of it before he realizes he has been gassed; the substance has never been deployed in war).
What are moles ?A mole can be defined as the amount of substance that contains the same number of chemical entities (atoms, ions, molecules, etc.) as there are in 12 g of Carbon-12 isotope, as defined by the General Conference on Weights and Measures.
Learn more about Moles here:
https://brainly.com/question/15356425
#SPJ4
how does nuclear reaction occur in the sun
Explanation:
In the core of the Sun hydrogen is being converted into helium. This is called nuclear fusion.
It takes four hydrogen atoms to fuse into helium atom. During the process some of the mass is converted into energy.
A nuclear reaction combining nuclei of lighter atoms together to form heavier nuclei resulting in the release of tremendous amount of energy is called a nuclear fusion reaction.
Nuclear fusion reaction takes place in the sun.
Answer:
In the core of the Sun hydrogen is being converted into helium. This is called nuclear fusion. It takes four hydrogen atoms to fuse into each helium atom. During the process some of the mass is converted into energy.
A car accelerates from 5.0 m/s to 21 m/s at a rate of 3.0 m/s2. how far does it travel while accelerating?
The car which accelerates from 5.0 m/s to 21 m/s at a rate of 3.0 m/s2 travels 69.33 m
The formula for Uniformly varied rectilinear motion (UVRM) and procedure we will use to solve this exercise is:
x = (vf²-vi²)/ (2a)
Where:
x = distancevf = final velocityvi = initial velocitya = accelerationInformation about the problem:
vi= 5.0 m/s vf = 21 m/sa = 3.0 m/s2x= ?Applying the distance formula, we have:
x = (vf²-vi²)/ (2a)
x = [(21 m/s)²- (5.0 m/s)²]/ (2 * 3.0 m/s²)
x = (441 m²/s²- 25 m²/s²)/ 6 m/s²
x = 416 m²/s²/ 6 m/s²
x = 69.33 m
What is acceleration?It is a physical quantity that indicates the variation of velocity as a function of time, it is expressed in units of distance per time squared e.g.: m/sec2 ; km/h2
Learn more about acceleration at: brainly.com/question/14344386
#SPJ4
If the car maintains its constant acceleration, how much additional time does it take the car to reach a velocity of 35.0 m/sm/s ? express your answer in seconds.
5 seconds is the additional time.
Describe acceleration using an example.It is possible for an object's velocity to alter by increasing, decreasing, or changing its direction of motion. A few instances of acceleration include an apple falling to the ground, the moon orbiting the earth, and a car coming to a stop at a set of traffic lights.How is acceleration measured?A metre per second (m/s2) is used to measure acceleration. The newton is the unit of force responsible for producing an acceleration of one meter per second per second when applied to a mass of one kilogram.learn more about acceleration here
https://brainly.com/question/25749514
#SPJ4
I need help with this ASAP.. it was due today.. I'm not playing no games
Answer:
The answer is January. Your welcome
Explanation:
Determine whether the underlined numerical value is a parameter or a statistic. explain your reasoning. a certain zoo
Parameter, because the data set of all 843 animals in a zoo is a population.
The population of all animals in the Zoo is 843
Proportion = 8%, which is the ratio regarding the population. So 8% is populaton proporiton, i..e Parameter .
What is a zoo?A zoo, short for the zoological garden, is a place where animals are kept in enclosures, cared for, presented to the public, and occasionally bred for conservation efforts. The phrase zoological garden refers to zoology, the study of animals. It is also used to refer to an animal park or menagerie. In the United States alone, over 181 million people visit zoos every year. The goal of the modern zoo, which first appeared in the 19th century in the United Kingdom was to entertain and inspire the public by offering scientific inquiry and later educational exhibits. The London Zoological Gardens, which was opened to the public in 1847 after being opened for scientific study in 1828, is where the abbreviation "zoo" first appeared.
To learn more about the Zoo, visit:
https://brainly.com/question/4657736
#SPJ4
If you use the approximate nonrelativistic equation for the magnitude of momentum of the proton, what answer do you get?
The answer is 4.96 * 10⁻¹⁹ kg m / s
Proton is an elementary particle that is identical to the nucleus of the hydrogen atom, along with the neutron is a constituent of all other atomic nuclei, that carries a positive charge numerically equal to the charge of an electron, and has a mass of 1.673 × 10−27 kilogram
nonrelativistic equation for the magnitude of the momentum of the proton is p = m * v
Then: p = m * v
Then Let's calculate its value
After that p = 1.67 * 10⁻²⁷ * 0.99 * 3 * 10⁸
Now, p = 4.96 * 10⁻¹⁹ kg m / s
hence the answer is 4.96 * 10⁻¹⁹ kg m / s
For more information on momentum click on the link below:
https://brainly.com/question/1042017
#SPJ4
A solution is made by mixing 27.g of chloroform chcl3 and 55.g of acetyl bromide ch3cobr. calculate the mole fraction of chloroform in this solution. round your answer to 2 significant digits.
The Mole fraction of Chloroform in this solution is 0.336
We know that,
Mole Fraction of Chloroform = No. of moles of Chloroform / Total number of moles of the solution
No. of moles = Mass / Molar mass
Given that,
Mass of Chloroform = 27g
Mass of Acetyl bromide = 55g
Molar mass of Chloroform = 119.38 g/mol
Molar mass of Acetyl Bromide = 122.95 g/mol
No. of moles of Chloroform = 27 / 119.38 = 0.226 moles
No. of moles of Acetyl Bromide = 55 / 122.95 = 0.447 moles
Total no. of moles = 0.226 + 0.447 = 0.673 moles
Mole fraction of chloroform = 0.226 / 0.673 = 0.336
In a solution containing at least 2 components, the number of moles of one component divided by total number of moles in that solution is called Mole fraction.
Therefore, the Mole fraction of Chloroform in this solution is 0.336
To know more about Mole fraction
https://brainly.com/question/14469503
#SPJ4
A father and his young daughter are ice skating. they face each other at rest and push each other, moving in opposite directions. which one has the greater final speed? group of answer choices
A father and his young daughter are ice skating. According to it, the daughter has greater speed.
The law of action and response is Newton’s third principle.According to Newton’s third law, when two bodies come into contact, they exert forces on one another that are equal in size and directed in the opposite direction. The law of action and reaction is another name for the third law.
This law applies to bodies in uniform or rapid motion and is crucial for addressing problems of static equilibrium, where all forces are in balance. The forces it discusses are actual phenomena, not just accounting tricks.
If there is a net force operating on a body, it moves faster in line with the second rule.
If there is no net force acting on the body, either because there are no forces at all or because all forces are precisely balanced by opposing forces, the body does not accelerate and is said to be in equilibrium.
On the other hand, it can be assumed that a body that appears to be moving slowly has no net force acting on it.
So going according to it, the daughter has greater speed.
To know more about Newton’s Laws of motion visit:
https://brainly.com/question/974124
#SPJ4
Unshielded twisted-pair cable capable with a specification of 100 mhz/100 mbps is also called category ________.
Unshielded twisted-pair cable capable with a specification of 100 MHz/100 maps is also called category of switch.
What is Unshielded twisted-pair cable?The unshielded turned pair link is 100-ohm copper link that is constitutive of unshielded curved matches which range somewhere in the range of two to 1,000 and 800. They have no metallic covering on top of the contorted wires. This enjoys the benefit of making the link more modest in distance across. One normal use for protected wound pair links is to involve it in outrageous cold circumstances. Many individuals know that critical exploration is being led in very chilly region of the world. Truth be told, turned pair links have tracked down a great deal of utilizations in the media communications industry prior to getting well known in the PC organizing industry.
Learn more about Unshielded twisted-pair cable, refer:
https://brainly.com/question/19090300
#SPJ4
What would happen to the predominant protonation state and charge of the his and asp side chains if the ph were to change from 7.40 to 5.00?
The predominant protonation state and charge of the His and Asp side chain will be predominantly protonated and positively charged if both its p[tex]K_{a}[/tex] values is more than 5.
We know that,
pH = p[tex]K_{a}[/tex] + ( log [ [tex]A^{-1}[/tex] ] / [ HA ] )
where,
[ [tex]A^{-1}[/tex] ] represents deprotonated form
[ HA ] represents protonated form
Consider pH = p[tex]K_{a}[/tex]
In this case,
[ [tex]A^{-1}[/tex] ] / [ HA ] = 1
This means that protonated and deprotonated forms are equal.
This also means that as pH decreases, the acid's state will be predominantly protonated and its charge will be positive.
The relationship between pH and p[tex]K_{a}[/tex] shown above is known as Henderson-Hasselbach equation
Therefore, the predominant protonation state and charge of the His and Asp side chain will be predominantly protonated and positively charged if both its p[tex]K_{a}[/tex] values is more than 5.
To know more about predominant protonation state
https://brainly.com/question/16678599
#SPJ4
What is the displacement if Susan walked 25km west to the store and 25km back home
An astronaut on a strange planet finds that she can jump a maximum horizontal distance of 15 m if her initial speed is 3 m/s. what is the free-fall acceleration on the planet?
Answer:
R = V^2 sin 2 θ / g range formula
R is a maximum for θ = 45 and R = V^2 g
g = V^2 / R = 3^2 / 15 = .6 m/s^2
If a football quarterback can throw the ball at 20.0 m/s, what is the furthest distance the quarterback could throw the ball neglecting air resistance?
The furthest distance the quarterback could throw the ball neglecting air resistance is 81.63 meters.
The situation given above is an example of projectile motion.
The maximum distance up to which a projectile can be thrown is known as its range, which is given by the formula,
Range(R) = 2u^2 sin(2θ)/g
Here u is the maximum velocity of the projectile= 20 m/s
θ is the angle at which the projectile is launched = 45°
g is the acceleration due to gravity = 9.8 m/s^2
Putting the above values in the given equation,
The range comes out to be 81.63 meters.
Hence, the furthest distance the quarterback could throw the ball neglecting air resistance is 81.63 meters.
To know more about "projectile motion", refer to the following link:
https://brainly.com/question/11422992?referrer=searchResults
#SPJ4