The shaft is supported by a smooth thrust bearing at a and a smooth journal bearing at
b. determine the resultant internal loadings acting on the cross section at
c. 600n/m b c lm -lsml sm 900

Answers

Answer 1

The resultant internal loading acting on the cross section of C are Normal force of 0 N, Shear force of 233.33 N and Bending moment of 433.325 N.

We know that Moment = Force * Distance.

Given that,

Force along span C = 600 N / m

First chart a free body diagram as shown in Fig 1.

The distributed load along span c is replaced by a point load F at its midpoint.

Force at midpoint of span C = 600 * 2 N

Take moments about point A

Σ [tex]M_{A}[/tex] = 0

-600 * ( 2 ) * [ 1 + ( ( 1 + 1 ) / 2 ) ] + [tex]B_{y}[/tex] ( 4.5 ) - 900 ( 6 ) = 0

- 2400 + 4.5 [tex]B_{y}[/tex] - 5400 = 0

[tex]B_{y}[/tex] = 1733.33 N

Consider a section at Point C and draw a free body diagram as shown in Fig 2.

In fig 2,

[tex]V_{C}[/tex] = Shear force at point C

[tex]N_{C}[/tex] = Normal force at point C

[tex]M_{C}[/tex] = Bending moment at point C

Applying equilibrium condition to the system. Consider equilibrium of Forces along X direction

Σ [tex]F_{x}[/tex] = 0

[tex]N_{C}[/tex] = 0 N

Consider equilibrium of Forces along Y direction

Σ [tex]F_{y}[/tex] = 0

[tex]V_{C}[/tex] - 600 ( 1 ) + [tex]B_{y}[/tex] - 900 = 0

[tex]V_{C}[/tex] = 600 - 1733.33 + 900

[tex]V_{C}[/tex] = 233.33 N

Take moment about point C

Σ [tex]M_{C}[/tex] = 0

- [tex]M_{C}[/tex] - 600 ( 1 ) ( 1 / 2 * 1 ) +  [tex]B_{y}[/tex] ( 2.5 ) - 900 ( 4 ) = 0

- [tex]M_{C}[/tex] - 300 + 2.5 ( 1733.33 ) - 3600 = 0

[tex]M_{C}[/tex] = 433.325 N

The resultant internal loading acting on the cross section are Normal force, Shear force and Bending moment

Therefore, The resultant internal loading acting on the cross section of C are as follows

Normal force [tex]N_{C}[/tex] = 0 N

Shear force [tex]V_{C}[/tex] = 233.33 N

Bending moment [tex]M_{C}[/tex] = 433.325 N

To know more about resultant internal loading

https://brainly.com/question/14502771

#SPJ4

The Shaft Is Supported By A Smooth Thrust Bearing At A And A Smooth Journal Bearing At B. Determine The
The Shaft Is Supported By A Smooth Thrust Bearing At A And A Smooth Journal Bearing At B. Determine The

Related Questions

Roughly how long would it take a fast moving craft that was initially propelled by rockets to reach the nearest star to the sun?

Answers

In other words, it would take Deep Space 1 more than 81,000 years to travel the 4.24 light-years between Earth and Proxima Centauri at its top speed of 56,000 km/h.

How long would it take to get to the nearest star at the speed of light?

At this speed, Voyager would take more than 73,000 years to reach Proxima Centauri. It would still take 4.22 years to get there even if we could move at the speed of light, which is not possible because of Special Relativity.

At perihelion, Helios 2 was able to reach a maximum velocity of approximately 240,000 km/h (150,000 miles/hour), which was attained by the Sun's gravitational attraction alone due to the significant eccentricity (0.54) of the probe's solar orbit (190-days). Even though, technically speaking, Helios 2's perihelion velocity was not a gravitational slingshot but rather a maximum orbital velocity, it continues to maintain the title of fastest man-made object.

To learn more about speed of light, visit:

https://brainly.com/question/17617161

#SPJ4

What wwould be abeeter material to use to make a frying pan - aluminiium or iron? why are iron pans not usully used by people who backpack?

Answers

Iron would be a better material to use to make a frying pan because, it is durable and great for baking or frying.

Iron pans are not used by people who use backpack or while travelling, because they are rather heavy and demand appropriate care.

Iron is the better material to use to make a frying pan.

If a flat-bottomed pan is used for frying, searing, or browning food, it is referred to as a frying pan, frypan, or skillet.

It usually has a diameter between 20 and 30 cm (8 and 12 in), a long handle, fairly low sides that flare outward, and no cover.

On larger pans, a little grab handle may be found directly across from the main handle. Similar in size, but with less noticeable, more vertical sides, and frequently with a lid, is a sauté pan.

Even though it can be used as a frying pan, a sauté pan is designed for cooking at lower temperatures.

Fry pans were typically fashioned of cast iron, carbon steel, or copper with a tin coating due to their unique characteristics and properties.

Copper pans are ideal for evenly sautéing due to their excellent thermal conductivity. However, many copper pans are now offered with changeable tin linings because they are also quite reactive with most foods.

Even though they don’t transmit heat very uniformly, cast iron pans are used because they are effective for searing meats and vegetables.

To know more about frying pans visit:

https://brainly.com/question/10890249

#SPJ4

A clock in a spaceship is observed to run at a speed of only 3 4 that of a similar clock at rest on earth. how fast (in terms of c) is the spaceship moving?

Answers

The speed of spaceship which run at a speed of only 3 4 that of a similar clock at rest on earth is 2.4 x 10^8 m/s

As from the given data, the clock in a spaceship is observed to run at a speed of 3/5 of a similar clock that rest on the earth is

T/T° = 3/5

When time moves at a high rate of pace, it slows down. The quantity of time dilation increases as an object moves more quickly. The constant speed of light, independent of the source of the light and the viewpoint of the observer, is partially explained by time dilation.

The expression for the time dilation is given by

T = γT°

γ = T/T°

γ = 1/√1 - v^2/c^2 is time dilation

Substituting the values in the above equation as,

γ = T/T°

5/3 = 1/√1 - v^2/c^2

v^2/c^2 = 16/25

v = 0.8 c

v = 0.8 x 3 x 10^8 m/s

v = 2.4 x 10^8 m/s

Hence, speed of spaceship moving is

2.4 x 10^8 m/s

Learn more about Speed here:

https://brainly.com/question/13943409

#SPJ4

Sing kepler's 3rd law, a hypothetical planet is twice as far from the sun as the earth. it should have a period of:_________

Answers

If a hypothetical planet is twice as far from the sun as the earth, it should have a time period of 1032 days.

In the early 17th century, Johannes Kepler observed planetary motions and researched them to give three laws known as Kepler’s Laws.

These laws are:

(1) Law of orbits

(2) Law of Areas

(3) Law of Periods

According to the third law, the square of the time period of revolution of a planet around the sun is proportional to the cube of the distance between the sun and the planet, represented by the following  formula

T^2 = r^3

Let T1 be the time period of the revolution of Earth and T2 be the time period of the revolution of the hypothetical planet.

Let r1 be the distance between Earth and the sun and r2 be the distance between the hypothetical planet and the sun.

From the above equation

T1^2 = r1^3

T2^2 = r2^3

Dividing the above equations,

(T1/T2)^2 = (r1/r2)^3

We are given that,

r2 = 2 x r1

And T1 = 365 days

So,

(365/T2)^2 = (r1/2r1)^3

Solving the above equation,

T2 comes out to be 1032 days.

Hence, if a hypothetical planet is twice as far from the sun as the earth, it should have a time period of 1032 days.

To know more about "Kepler's Laws", refer to the following link:

brainly.com/question/28192903?referrer=searchResults

#SPJ4

Mars is roughly 60 million km from earth. How long does it take for a radio signal originating from earth to reach mars? radio signals travel at the speed of light

Answers

Answer:

200 seconds

Explanation:

60 000 000 000 m / 3 x 10^8 m/s

6 x 10 ^10  / 3 x 10^8  s

2 x 10^2 s = 200 seconds

What volume (in ml) of 1 m barium hydroxide would neutralize 78.2 ml of 2.549 m hydrobromic acid?

Answers

C3H7Br would neutralize 78.2 ml of 2.549 m hydrobromic acid.

What is hydrobromic acid?

Hydrobromic acid, a powerful acid that is created by dissolving hydrogen bromides in water, is the end product.

Hydrobromic acid is a diatomic compound with the molecular symbol HBr. Hydrogen bromide is a colorless, suffocating gas that is extremely soluble and dissociated in water.

It quickly reeks when moist air is present. When encountered, hydrogen bromide gas, a very corrosive chemical, can cause severe burns.

Hydrobromic Acid’s Chemical Makeup – HBr

Sulfur dioxide, bromine, and water are produced when hydrobromic acid and sulfuric acid are combined. Below is the chemical equation.

Br2 + SO2 + 2H2O = 2HBr + H2SO4

2-Bromopropane is created when hydrobromic acid and propene undergo an addition process. Below is the chemical equation.

C3H6 + HBr = C3H7Br

To know more about hydrobromic acid. Visit:

https://brainly.com/question/13043727

#SPJ4

A spacecraft is in a 500-km by 900-km leo. how long (in minutes) does it take to coast from perigee to the apogee?

Answers

Spacecraft will take around 49 minute and 92 second to coast from perigee to the apogee.

We use Kepler's third law for which the time period is defined as

[tex]T = 2 \pi \sqrt[]{\frac{a^{3} }{GM} }[/tex]

The Prague's altitude is the shortest distance between the earth's surface and satellite.

The average distance of the perigee and  apogee of satellite can be defined as

a = R + [tex]\frac{r_{1} +r_{2} }{2}[/tex]

R is the radius of earth (6374.1km)

r1 is the lower orbit. (500km)

r2 is the higher orbit.(900km)

Using the values in above equation we get:

6374.1+ (500+ 900)/2

a = 7078.1 km

Time taken to fly from perigee to apogee equals to the half of the orbital speed so

t = T/2

[tex]t = \pi \sqrt[]{\frac{a^{3} }{GM} }[/tex]

by using the values we get-

=  √[(7078.1)³/6.67 ×10⁻¹¹ × 6×10²⁴]

= 295573.94 * 10⁻²

= 2995.73s

t = 49 mint 92 sec

It will take around 49 minute and 92 second to coast from perigee to the apogee.

To know more about perigee ang apogee :

https://brainly.com/question/28538480

#SPJ4

Which depiction of changing chemical compounds best describes the flow of nitrogen from the atmosphere, through the nitrogen cycle, and back into the atmosphere?

Answers

The depiction of changing chemical compounds that best describes the flow of nitrogen from the atmosphere, through the nitrogen cycle, and back into the atmosphere is N2 → NH4+ → NO3- → N2

Ammonification: The formation of ammonia or its compounds from nitrogenous compounds, especially as a result of bacterial decomposition. It is given by this equation: N2 → NH4+

Nitrification: The biological oxidation of ammonia with oxygen into nitrite followed by the oxidation of these nitrites into nitrates. It is given by this equation: NH4+ → NO3-

De-nitrification: A microbially facilitated process of nitrate reduction that may ultimately produce molecular nitrogen (N2) through a series of intermediate gaseous nitrogen oxide products.

NO3- → N2

To learn more about nitrogen cycle. Click https://brainly.com/question/1593859

#SPJ4

How many grams of solid magnesium nitrate (148.3 g/mol) should be added to 500 ml of 0.118 m of sodium nitrate in order to produce an aqueous 0.25 m solution of nitrate ions?

Answers

4.89g of solid magnesium nitrate (148.3 g/mol) should be added to 500 ml of 0.118 m of sodium nitrate in order to produce an aqueous 0.25 m solution of nitrate ions.

Solution and Explanation

From the given info, we know that there is already the presence of nitrate already mixed in the solution. then we have to find out how more is required to be added to it.

first, we find moles of NaNO3

0.500L x 0.118 M = 0.059 moles NaNO3

this means there are 0.059 moles of[tex]NO^{-} _{3}[/tex]

Here volume is not changing, so amount of moles needed to make this concentration = 0.25M x 0.5L = 0.125 moles

0.125 - 0.059 moles = 0.066 moles of [tex]NO^{-} _{3}[/tex] required to be added in the solution.

for every 1 mole of Mg[tex](NO^{-} _{3} )_ {2}[/tex], there are 2 moles of [tex]NO^{-} _{3}[/tex].

so, we will only need half of the total moles of magnesium nitrate.

converting moles to grams,

0.033 moles Mg[tex](NO^{-} _{3} )_ {2}[/tex] x 148.3 g/mol = 4.89g Mg[tex](NO^{-} _{3} )_ {2}[/tex]

To know more about such solution concentration related problems, visit:

https://brainly.com/question/13961988

#SPJ4

Define what is meant by a "frame of reference" in physics. as we study motion, what will we normally use as our reference frame? give an example of motion being described using this reference frame. under what conditions would we use a different reference frame to describe motion? give two examples of using a different reference frame to describe motion, explaining why this different reference frame is used.

Answers

A frame of reference is just a set of coordinates that are used in the study of physics to calculate things like position and velocity. Axes that specify the three dimensions of space within the frame of reference are often included in such a frame.

What is the example of a motion being defined using this FOR?

A railway platform is an illustration of an inertial frame of reference. The platform doesn't move, hence it satisfies the requirement for not accelerating. The platform's objects move according to the law of inertia.

Under what conditions do we use a different FOR?

An acceleration with respect to an inertial frame characterizes a non-inertial reference frame. In general, an accelerometer at rest in a non-inertial frame will pick up a non-zero acceleration. While all inertial frames share the same laws of motion, non-inertial frames have different laws of motion depending on the acceleration. For example, let's imagine you are driving through a stop signal in an automobile. The automobile has stopped moving. The automobile accelerates when the light turns green. The car is not an inertial frame of reference when it is accelerating. You will feel yourself "pushed" into the seat if the acceleration is significant enough.

To know more about inertial frame of reference visit:

https://brainly.com/question/3277563

#SPJ4

An object that is dropped from a height H falls with a constant acceleration of g. The final
speed, v, just before it reaches the ground can be expressed as v = sqrt(2gh). By how much does the height need to change double the final velocity?

Answers

The height need to change by 4 to double the final velocity.

Final velocity of the object

The final velocity of an object during a free fall is related to maximum height of fall as given the equation below.

v = √2gh

v² = 2gh

v²/h = 2g

v₁²/h₁ = v₂²/h₂

when v₂ = 2v₁, change in height is calculated as;

h₂ = h₁v₂²/v₁²

h₂ = (h₁ (2v₁)²) / (v₁)²

h₂ = 4h₁v₁² / v₁²

h₂ = 4h₁

Thus, the height need to change by 4 to double the final velocity.

Learn more about final velocity here: https://brainly.com/question/25905661

#SPJ1

Chapter 1102 of the ______ governs the practice of texas real estate inspectors.

Answers

Chapter 1102 of the Texas Occupations Code governs the practice of Texas real estate inspectors.

What are the titles included in the texas Occupations Code?

All legislation and regulations passed by the state legislature are included in the Texas Education Code. It applies to the majority of educational institutions that receive all or a portion of their funding from state taxes. The Texas Constitution and all state statutes are both searchable indexes.

1  General Requirements

2  General Licensing Provisions

3  Health Professions

4  Animal-Related Professions

5  Financial and legal services regulation

6  Control of Practices in Engineering, Architecture, Land Surveying, and Related Fields

7  Real Estate and Housing-Related Practices and Professions

8  Environmental and industrial trades regulation

9  Regulation of Cosmetologists, Barbers, and Related Professions

10  Jobs in Security and Law Enforcement

11  Jobs in Sales and Solicitation Regulation

12  Water, Health, and Safety-Related Practices and Trades

13  Sports, recreation, and entertainment

14  Motor Vehicle and Transportation Regulation

15  Employment-Related Professions

To know more about the texas Occupations Code, refer:

https://brainly.com/question/28084117

#SPJ4

A record is declared as follows: the first letter in the first name is stored in location 1000. each letter takes one location and an integer takes two locations. what is the address of last[2]?

Answers

1012, a record is declared as follows: the first letter in the first name is stored in location 1000. Each letter takes one location and an integer takes two locations.

Multiplication and Division of Integers: the merchandise of a positive integer and a negative integer is negative: the merchandise of two positive integers is positive. The product of two negative integers is positive.

They are important because they assist to facilitate certain calculations by including integer negative numbers. In addition, they also include all negative and positive numbers without a percentage point.

The whole numbers are real numbers that don't have fractions, decimals, and negative numbers. It's neither positive integer nor negative. Zero obeys the rule of whole numbers. Positive numbers are greater than 0 and located to the proper of 0 on the variety line.

Negative numbers are but 0 and located to the left of 0 on the variety line. The quantity zero is neither positive nor negative. Zero is neither positive nor negative. It's the sole number with such characteristics.

learn more about integer: https://brainly.com/question/17695139

#SPJ4

The visible light spectrum is bounded on either side by which two types of radiation?

Answers

The visible light spectrum is bounded by these two types of radiation: ultraviolet and near infrared.

In physics, electromagnetic radiations are kind of waves that carry electromagnetic field and travel through space.

These waves transport electromagnetic energy while traveling through space.

Different types of electromagnetic waves are radio waves, infrared light, microwaves, gamma rays, UV radiations, and x-rays. While visible light is made up of only infrared and UV.

All these waves have different wavelengths, frequency and energy and make definite part of the electromagnetic spectrum.

These waves have dual nature and also exhibit dual particle nature and travel with light speed.

If you need to learn more about visible light click here:

https://brainly.com/question/12732705

#SPJ4

At the summer solstice in the northern hemisphere, the sun:____.

Answers

The complete statement is → At the summer solstice in the northern hemisphere, the sun travels longest path through the sky.

We have a statement regarding summer solstice in northern hemisphere.

We have to complete the statement using appropriate words.

What is Summer Solstice?

A Solstice that marks the onset of summer. To be more precise, 21st June in northern hemisphere marks the summer solstice and 22nd December in southern hemisphere marks the Summer solstice.

According to the question, we have -

At the summer solstice in the northern hemisphere, the sun ____.

The given sentence can be completed as →

At the summer solstice in the northern hemisphere, the sun travels longest path through the sky.

On this day, there is more daylight. During the summer solstice in northern hemisphere, the north pole is shifted 23.4° toward the Sun which lasts until the autumnal equinox (September 22 or 23) where it ends.

Hence, the complete statement is → At the summer solstice in the northern hemisphere, the sun travels longest path through the sky.

To learn more about Summer solstice, visit the link below-

https://brainly.com/question/4172420

#SPJ4

use the diagram to answer the following physics questions:
i. where is the velocity zero?
ii. where is the velocity positive?
iii. where is the velocity negative?
iv. where is the fastest velocity?
v. where is the acceleration positive?
vi. where is the acceleration negative?
vii. where is the acceleration zero?
(if you could explain that would be great! thank you so much :) )

Answers

Answer:

i. Point A

ii. None

iii. All points

iv. F

v. None

vi. All

vii. None

Explanation:

i. Not quite sure if I'm interpreting the diagram right, but from the second the ball is released, it will start accelerating. Point A is where the velocity will be closest to 0 but not necessarily 0 as it will have started accelerating downwards.

ii. Assuming standard directions for vectors, the velocity is positive at none of the points as the ball is travelling in a downwards direction.

iii. Since the ball is always travelling downwards, its direction and therefore velocity is a negative number at all points in this diagram.

iv. The ball is accelerating as it falls so the further or the longer it falls, the faster its velocity, therefore in this diagram, it is fastest at point F.

v and vi. Assuming same direction principles as ii and iii (as acceleration and velocity are both vectors), acceleration is always downwards, therefore it is positive at no points, and negative at all of them.

vii. Acceleration due to gravity is always constant, so unless the ball is not moving (being held by the boy), acceleration is not 0 at any of the points.

Hope this helped!

Based on einstein's theory of gravity, if the sun and its mass were suddenly to disappear, earth would:________

Answers

Based on Einstein's theory of gravity, if the sun and its mass were to suddenly disappear, earth would stay in its current orbit for a few minutes before taking off into space.

What would occur to our world if the sun were to suddenly vanish?

The Earth would be drawn to a new center of gravity if the sun disappeared. Earth's gravity would change, as would that of the rest of the solar system, and Earth would begin to drift into space since there would no longer be a steady source of energy from the sun. It is a foolish dream to think that life could exist without the sun forever. Humans could be able to survive for a while in some sort of base, such as a nuclear-powered dome.

The good news is that there wouldn't be many living things for the radioactive waste to endanger; however, there also probably wouldn't be any liquid water to cool the power system. All photosynthetic species, including plants and algae, would die if just the sun's light persisted.

To learn more about The Sun and Earth, visit:

https://brainly.com/question/12243192

#SPJ4

Find the electron and hole concentrations and fermi level in silicon at 300 k for boron

Answers

To find the electron and hole concentrations and fermi levels in silicon at 300 k for boron, fermi level is 9.3 x [tex]10^4 cm^-3[/tex].

Calculation and Explanation

Ionization energy for boron in Si, 0.045 eV

Fermi level in silicon,

300 K at [tex]10^{15} cm^{-3}[/tex] (Boron atoms)

All boron impurities are ionized, 300K

Electron, hole concentrations and Fermi levels is found out,

The value of Na = [tex]10^{15} cm^{-3}[/tex]

np = [tex]\frac{ni^2}{nA}[/tex]

np = [tex]\frac{(9.65 x 10^9)^2}{10^15}[/tex]

np= 9.3 x [tex]10^4 cm^-3[/tex]

Fermi level is calculated,

Ef - Ev = kT ln(NV/ND)

value of kT = 0.0259 eV (300° K)

So, substitution the values

Ef - Ev = kT ln(NV/ND)

Ef - Ev = 0.0259ln (2.66 x [tex]10^{19} / 10^{15}[/tex] )

Ef - Ev = 0.0259ln (26600)

Ef - Ev = 0.0259 x 10.18

Ef - Ev = 0.263 eV

What is ionization energy?

Ionization energy, also known as ionization energy (IE) or ionization energy (British English spelling), is the minimal amount of energy needed to free the most loosely bonded electron from an isolated gaseous atom, positive ion, or molecule in physics and chemistry.

To know more about ionization energy, visit:

https://brainly.com/question/16243729

#SPJ4

The imidazole side chain of histidine has a pka of 6.04. illustrate the predominant structures for histidine at (i) ph 4, (ii) ph 8, and (iii) ph 12. indicate stereochemistry at the ca.

Answers

The histidine imidazole side chain has a pka of 6.04. To illustrate the predominant structures for histidine at (i) ph 4, (ii) ph 8, and (iii) ph 12, we have the pictures attached below. The first one indicates structure at ph 4, second one indicates ph 8 and third indicates ph 12.

What is stereochemistry?

The study of stereochemistry is focused on stereoisomers, which by definition have the same molecular formula and sequence of bonded atoms (constitution) but differ in the three-dimensional orientations of their atoms in space.

Stereochemistry is a subfield of chemistry that deals with the relative spatial arrangement of atoms that form the structure of molecules and their manipulation. Because the prefix “stereo- “denotes “three-dimensionality,” it is also referred to as “3D chemistry.”

One crucial area of stereochemistry is the study of chiral molecules. Stereochemistry covers the entire range of organic, inorganic, biological, physical, and particularly supramolecular chemistry.

The study of stereochemistry involves techniques for identifying and describing these interactions, as well as the impact these relationships have on the physical or biological characteristics of the molecules in question.

To know more about imidazole side chain, Visit:

https://brainly.com/question/14691147

#SPJ4

An fm radio station broadcasts an oscillating radio wave at a frequency of 100 mhz. what is the period of the oscillation?

Answers

A shorter period implies a higher frequency because the relationship between the period and frequency is inverse.

T= 1/f = 1 / 1×10⁸s = 10ns

What is frequency?

An event's repetitions per unit of time are what determine its frequency. It is also referred to as ordinary frequency in comparison to angular frequency and sometimes as temporal frequency in contrast to spatial frequency. Period, the inverse of frequency, is the duration of time required for one cycle of a repeating event. For instance, a heart that beats at a rate of 120 beats per minute (2 hertz) has a period (T) of 0.5 seconds between each beat (60 seconds divided by 120 beats).

To learn more about frequency, visit:

https://brainly.com/question/14316711

#SPJ4

The mass of an apple was 84.0 g.
The volume of the apple was 120 cm³.
Calculate the density of the apple.
Give your answer in g/cm³.

Answers

Density = mass / volume
= 84 / 120
= 0.7 g / cm^3

If two angles of a triangle have radian measures 9 and 3 8 , find the radian measure of the third angle.

Answers

The third angle of the triangle should be 37π/72 rad.

We need to know about the triangle rule to solve this problem. One of the rules of the triangle is the total angle inside the triangle is 180⁰.

A + B + C = 180⁰

From the question above, the given parameter is

A = π/9 rad

B = 3π/8 rad

Convert the angle to radian

180⁰ = π

Hence, the total angle should be

A + B + C = π

π/9 + 3π/8 + C = π

C = π - (π/9 + 3π/8)

C = π - 35π/72

C = 37π/72 rad

Hence, the third angle of the triangle should be 37π/72 rad

Find more on triangle at: https://brainly.com/question/25215131

#SPJ4

If the position function of a particle is a linear function of time, what can be said about its acceleration?

Answers

The acceleration of the particle will be 0.

We have position function of a particle is a linear function of time.

We have to determine its acceleration.

What is Acceleration ?

The rate of change of velocity with respect to time is called Acceleration.

According to the question -

Assume that the linear function of position of a particle is as follows -

x = mt + c

Where x is displacement of particle and t is time.

Now, Differentiating with respect time, we get velocity -

[tex]$\frac{dx}{dt} = \frac{d}{dt}\;(mt+c) = m[/tex]

Differentiating again with respect time, we get acceleration -

[tex]$\frac{d^{2} x}{dt^{2} } = \frac{d}{dt}\;m = 0[/tex]

Hence, the acceleration of the particle will be 0.

To solve more questions on Kinematics, visit the link below-

https://brainly.com/question/11106650

#SPJ4

An earth satellite has a speed of 7.5 km/s and a flight path angle of 10 degrees when its radius is 8000 km. what is the angular momentum (in km 2/s)?

Answers

An earth satellite has a speed of 7.5 km/s and a flight path angle of 10 degrees when its radius is 8000 km.

-21.7km square /s square is the angular momentum (in km 2/s).

what is a satellite?The term "satellite" or "artificial satellite" refers to an object that has been placed into orbit in space on purpose. Except for passive satellites, most spacecraft have a way of generating power for the technology they carry, such as solar panels or radioisotope thermoelectric generators (RTGs). Most satellites also have transponders, which are a type of ground station communication system. The most typical satellites, tiny CubeSats, use a standardi Due to the expensive cost of space launch, satellites are designed to be as light and durable as possible. Satellites of the same type can work together to form constellations.

To learn more about the artificial satellite, refer to the following link:

https://brainly.com/question/18496962

#SPJ4

Which microscope shows cells against a bright background and the intracellular structures of unstained cells based on their varying densities?

Answers

Phase contrast microscope shows cells against a bright background and the intracellular structures of unstained cells based on their varying densities.

A technique called phase-contrast microscopy is used to contrast a translucent object without staining it. Phase-contrast microscopy has a number of benefits, including the ability to employ high-resolution objectives, but doing so necessitates a specialised condenser and more expensive objectives.

With the help of the optical contrast technique known as phase contrast, biological specimens' cells can show their unstained architecture. With brightfield illumination, cell structures that appear transparent can be seen in high contrast and in great detail with phase contrast.

Phase-contrast photographs often have a grey backdrop with varying amounts of light and dark elements. Halo-light ring creation, a drawback of phase-contrast microscopy, is one.

Learn more about Phase contrast microscope:

https://brainly.com/question/14774285

#SPJ4

What strategies are likely to be most effective in teaching a young child to throw a ball?

Answers

The best strategy for teaching a toddler or pre-schooler to throw is to simply play lots of throwing games with them without providing instruction. This will enable children to learn the fundamentals of throwing as their muscle coordination gradually improves over time.

What do you mean by throwing?

Throw me a ball is an expression used to launch a ball through the air To abruptly place in a particular state or situation Please don't throw rubbish on the ground. He was thrown in jail to cause to tumble .The horse hurled its rider to put on or take off in a fast Let me throw on a coat.

Which three forms of throwing are there?

Overhand, underhand, and throws made with both hands are among the different kinds. Underhand throws are typically made below the shoulder, whereas overhand throws are typically made above.

To know more about Throwing visit:

https://brainly.com/question/1503439

#SPJ4

A ball is thrown upward with a velocity of 19.6. what us its veloicty after 3 sec

Answers

Initial velocity exists at 19.6 m per second. Plus acceleration exists equivalent to expression due to gravity, but it exists downward, so it will be negative -9.8 m per second squared and time exists three seconds, so this exists equivalent to this gives us - 9.8 meter per second velocity after 3 seconds.

How to find the initial velocity?

The acceleration of the ball will be a constant [tex]$9.8 \frac{\mathrm{m}}{\mathrm{s}^2}$[/tex] (downward), regardless of whether the ball exists traveling upward or downward.

The equation that makes this calculation simplest is

[tex]$$V_f=V_i-g(\Delta t)$$[/tex]

where the negative sign has been used to account for the opposite directions of [tex]$V_i$[/tex] and g. After 3 seconds,

[tex]$V_f=19.6-(9.8)(3)=19.6-29.4=-9.8 \frac{m}{s}$$[/tex]

The negative result tells us that the ball is on its way downward by this time (consistent with our choice of a negative value for the downward acceleration of gravity).

Initial velocity exists at 19.6 m per second. Plus acceleration exists equivalent to expression due to gravity, but it exists downward, so it will be negative -9.8 m per second squared and time exists three seconds, so this exists equivalent to this gives us - 9.8 meter per second velocity after 3 seconds.

The complete question is:

A ball is thrown upward at a velocity of 19.6 m/s. What is its velocity after 3.0 s, assuming negligible air resistance?

To learn more about Initial velocity refer to:

https://brainly.com/question/25749514

#SPJ4

Ssuming that the relationship between spring compression and height is quadratic, how far will the ball go at the highest setting, which compresses the spring 3 cm ?

Answers

The ball goes at the highest setting of 2.25cm, which compresses the spring by 3 cm.

What is spring?

Spring is an elastic object that holds mechanical energy. Typically, springs are fabricated from spring steel. Springtime has many different patterns. A conventional spring without stiffness variability features exerts an opposing force that is roughly proportional to its change in length when it is compressed or stretched from its resting state. The word is frequently used to describe coil springs in daily speech (this approximation breaks down for larger deflections). The rate also referred to as the spring constant, is the proportion of a spring's change in force to change in deflection. In other words, it is the force against the deflection curve's gradient.

To learn more about spring, visit:

https://brainly.com/question/22713852

#SPJ4

Do you recommend the use of nuclear power as a main source of energy? explain your answer (PLEASE HELP WILL MARK BRAINLIEST!!)

Answers

Yes because;

i.Nuclear energy protects air quality

✓Nuclear is a zero-emission clean energy source.

It generates power through fission, which is the process of splitting uranium atoms to produce energy. The heat released by fission is used to create steam that spins a turbine to generate electricity without the harmful byproducts emitted by fossil fuels.

ii.Nuclear energy produces minimal waste

iii.Nuclear energy’s land footprint is small

✓Despite producing massive amounts of carbon-free power, nuclear energy produces more electricity on less land than any other clean-air source.

what fives the identity of an atoms and its place on the periodic table

Answers

Answer:

atomic number

Explanation:

In the modern periodic table, the elements are listed in order of increasing atomic number. The atomic number is the number of protons in the nucleus of an atom. The number of protons define the identity of an element (i.e., an element with 6 protons is a carbon atom, no matter how many neutrons may be present).

*in the question you have written fives i think it has to be gives .*

please make my answer as brainelist

Other Questions
The process in which two distinct lineages evolve a similar characteristic independently of each other because both lineages experience similar environmental challenges or selective pressures is? Italianate scenery slowly disappeared in the late nineteenth century and gave way to the box set, which is ______. multiple choice question Microbiology involves the study of microscopic organisms or agents, including ______. Why does aquaporin (aqua1) transport h2o orders of magnitude faster across the erythrocyte plasma membrane than glut1 transports glucose? Which atoms in the amino acids become the h2o molecule produced by their action in model? How would the nurse position the patient who has to undergo administration of nasal medication? What protein plays an important role in determining cell shape by directing cell wall synthesis in non-cocci bacteria? the class was required to draw plan for the foundation day. Mary and tess was assigned to draw buildings. mary draw buildings twice as much as tess. if the total buildings are 99, how many buildings was draw by mary and tess The midpoint of a line segment ab is (1, 2). point a coordinates are (3,-3) and point b coordinates are (x, 7). find the value of x. When buyers equate the status, quality, and value of an item with its cost, what part of the pricing strategy is involved with setting prices of luxury items? older students often feel that hazing is justified because they were freshman or sophomore. Do you think these older students are right? In a 3-5 paragraph essay, discuss how the process of science has been used to develop and support a theory of global climate change. What is the accepted theory? Is there scientific consensus about climate change? What evidence exists to support the theory, and what are its limitations?You may use any credible source to gather information about the theory of global climate change, its strengths, and limitations. Your essay should be organized around a clear thesis statement that is supported by at least 3 pieces of scientific evidence. You must include introductory and concluding paragraphs, and address each component of the process of science, as described in this lesson. Use the attached rubric as a guide, and be sure that all information is written in your own words.You may submit your essay in the text box provided, or upload it as a file. Be sure to review your work before you submit it. This is one of two graded assignments in this unit. What law gives law enforcement agencies greater power to monitor electronic and other communications with fewer checks? The nurse is assessing a patient for the movement of the hip ball-and-socket joint. which range-of-motion (rom) exercise should the nurse ask the patient to perform to assess adduction? as a contractor to make a hole 4 5/8 inches diameter. express the mixed number as an improper fraction. Evaluating the various hypotheses concerning the evolution of modern humans would suggest that most genetic evidence supports:______. Enclose the error in solving the polynomial multiplication. Then correct it. Correction: 1, Let a = 2i-3j +4k and b = 2i+4k a) Find the Projection of a "a" long "b" b) Find the Projection of "b" along "a" To create space between lines of your typed document, the path is _______A.Format Line SpacingB.Format> ColumnsC.File Page SetupD.Insert > Tables What percent of 32 is 4?A 12.5%B 1.28%of 32 is 4?C 0.125%D 8%